€180,00
The FXI-1 provides 26V voltage speak to mount a free netlijnpoort (FXO). Simply turn the switch and disconnect the FXI-one to a phone port (FXS). There is no power supply required in the FXS mode. In the event that the broadcasting unit to a 600ohm port of a telephone system is to be coupled occurs, the VOX circuit in operation. This configuration is useful for systems that do not generate broadcasting contact.
Description
FXI-1 Universal Paging Interface
The FXI-1 is a universal coupling and allows broadcasters broadcast from any type of telephone system possible, instead of a microphone. You can also add background music and night bell to broadcasting system.
The FXI-1 provides 26V voltage speak to mount a free netlijnpoort (FXO). Simply turn the switch and disconnect the FXI-one to a phone port (FXS). There is no power supply required in the FXS mode. In the event that the broadcasting unit to a 600ohm port of a telephone system is to be coupled occurs, the VOX circuit in operation. This configuration is useful for systems that do not generate broadcasting contact.
In each mode, provides for the FXI-1 potential-free make and break contacts for driving of the main broadcasting system. After broadcasting switches FXI-1 automatically at polarity reversal (CPC), busy signal, or silence timer.
Opportunities
– FXO (netlijnpoort) FXS (phone port) or VOX select (audio detection) mode
– No power supply required in FXS mode
– Up to 6 units on a power adapter FXO or VOX mode
– 26V voltage to speak associate with FXO (netlijnpoort)
– 600ohm broadcasting output with volume control
– Open and closed contacts to control external broadcasting amplifier activation or steering remote broadcasting amplifier with external music source
– 800 Hz announcement tone (on / off)
– Works with 24 and 48 volt telephone (FXS)
– Calling Party Control (CPC) detection for immediate shutdown (only on external phone lines)
– Automatically shuts off after busy tone detection
– 2.5 seconds silence detection timer NC
– Programmable VOX sensitivity threshold
– Automatic lock-out timer: 10, 36, 60 seconds or
– Connections via screw strip
– Housing for wall mounting
applications
– Integrate your public address system with virtually any PBX or IP system
– Suppress background music while broadcasters
– Provides relay contacts for controlling broadcasting system if it is not provided by the PBX
– Add Advance notice Demonstrate your broadcasting system
specifications
– Power supply voltage: 12-24Vdc @ 100mA (including power adapter.) (Not needed in FXS mode)
– Dimensions: 111 x 76 x 36mm
– Shipping Weight: 480 grams
– Environment: 0 ° C to 32 ° C at 5% to 95% RH (non-condensing)
– Relay Contact: 30VDC @ 1A, 110VDC @ 0.3A, 0.5A @ 125VAC
– VOX minimal audio signal for activation relay: -28dbmminimum
– 1KHz with VOX sensitivity switch to normal
– VOX silence detection for disconnection: 2.5 seconds
– General lock-out timer: 16, 36, 60 seconds or
– Speak Voltage: 26VDC
Additional information
| Weight | 3 kg |
|---|---|
| is_recurring | 0 |
| gift_message_available | 0 |
| naya_call_for_price_enable | 0 |
| short_description | The FXI-1 provides 26V voltage speak to mount a free netlijnpoort (FXO). Simply turn the switch and disconnect the FXI-one to a phone port (FXS). There is no power supply required in the FXS mode. In the event that the broadcasting unit to a 600ohm port of a telephone system is to be coupled occurs, the VOX circuit in operation. This configuration is useful for systems that do not generate broadcasting contact. |
| meta_title | FXI-1 PBX PA BROADCASTING CLUTCH |
| meta_keyword | FXI-1 PBX PA BROADCASTING CLUTCH |
| meta_description | FXI-1 PBX PA BROADCASTING CLUTCH |
| msrp | 2.000000 |
| msrp_display_actual_price_type | 4 |
| tax_class_id | 2 |
