Call for Price
The AWK-5222 dual-RF wireless AP/Bridge/Client provides a flexible and highly reliable solution for your industrial wireless networks. The AWK-5222 is rated to operate at temperatures ranging from 0 to 60°C for standard models and -40 to 75°C for extended temperature models, and it is built rugged enough for industrial applications. With two independent RF modules, the AWK-5222 supports a greater variety of wireless configurations and applications, and the redundant wireless connections increase the reliability of the entire wireless network. The AWK-5222’s two DC power inputs make the power supply more reliable, and it can also be powered via PoE for easier deployment.
Redundancy to Increase System Reliability
• Dual DC power inputs and PoE
• Redundant dual-RF design for rapid fail-over
• Immunity against disconnection caused by radio interference
• Loading balance of wireless communication
Advanced Security
• 64-bit and 128-bit WEP (Wired Equivalent Privacy)
• Enable/disable SSID broadcasts
• Power filters for access control
• IEEE 802.1X/RADIUS supported
• WPA/WPA2/802.11i supported
• IEEE 802.11a/b/g compliant
• Redundant power inputs and PoE
• Higher security with WEP/WPA/WPA2/802.11X and powerful filters
• Turbo Roaming™ for seamless wireless connections
• Dual-RF design for redundant wireless communication
Specifications:
WLAN Interface
Standards:
IEEE 802.11a/g/b for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3u for 10/100BaseT(X)
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
64QAM @ 54 Mbps, 16QAM @ 24/36 Mbps, QPSK @ 12/18 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBSK@ 1 Mbps
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-base filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
TX Transmit Power:
802.11b:
Typ. 18±1.5 dBm @ 1 to 11 Mbps
802.11g:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps
802.11a:
Typ. 16±1.5 dBm @ 6 to 24 Mbps, Typ. 14±1.5 dBm @ 36 to 48 Mbps, Typ. 13±1.5 dBm @ 54 Mbps
RX Sensitivity:
802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
Protocol Support
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, RTP ,PPPoE, DHCP
AP-only Protocols: ARP, BOOTP, DHCP, dynamic VLAN-Tags for 802.1X-Clients, STP/RSTP (IEEE 802.1D/w)
Interface
Default Antenna: 2 dBi, dual-band omni-directional antenna, RP-SMA (male)
Connector for External Antenna: RP-SMA (female)
LAN Port: 10/100BaseT(X) auto negotiation speed (RJ45-type)
Console Port: RS-232 (RJ45-type)
LED Indicators: PWR1, PWR2, PoE, FAULT, STATE, WLAN1, WLAN2, 10M, 100M
Alarm Contact (Digital Output): 1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs: 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing: Metal, IP30 protection
Weight: 880 g
Dimensions: 62.05 x 135 x 105 mm (2.44 x 5.31 x 4.13 in)
Installation: DIN-Rail mounting (standard), Wall mounting (optional)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant)
Connector: 10-pin removable terminal block
Reverse Polarity Protection: Present
Regulatory Approvals
Safety: EN60950-1(pending), UL60950-1
EMC: EN301 489-1/-17, FCC Part 15
Downloads
AWK-5222Description
The AWK-5222 dual-RF wireless AP/Bridge/Client provides a flexible and highly reliable solution for your industrial wireless networks. The AWK-5222 is rated to operate at temperatures ranging from 0 to 60°C for standard models and -40 to 75°C for extended temperature models, and it is built rugged enough for industrial applications. With two independent RF modules, the AWK-5222 supports a greater variety of wireless configurations and applications, and the redundant wireless connections increase the reliability of the entire wireless network. The AWK-5222’s two DC power inputs make the power supply more reliable, and it can also be powered via PoE for easier deployment.
Redundancy to Increase System Reliability
• Dual DC power inputs and PoE
• Redundant dual-RF design for rapid fail-over
• Immunity against disconnection caused by radio interference
• Loading balance of wireless communication
Advanced Security
• 64-bit and 128-bit WEP (Wired Equivalent Privacy)
• Enable/disable SSID broadcasts
• Power filters for access control
• IEEE 802.1X/RADIUS supported
• WPA/WPA2/802.11i supported
• IEEE 802.11a/b/g compliant
• Redundant power inputs and PoE
• Higher security with WEP/WPA/WPA2/802.11X and powerful filters
• Turbo Roaming™ for seamless wireless connections
• Dual-RF design for redundant wireless communication
Specifications:
WLAN Interface
Standards:
IEEE 802.11a/g/b for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3u for 10/100BaseT(X)
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
Spread Spectrum and Modulation (typical):
• DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
64QAM @ 54 Mbps, 16QAM @ 24/36 Mbps, QPSK @ 12/18 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBSK@ 1 Mbps
Operating Channels (central frequency):
US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
Security:
• SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-base filtering
• 64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates:
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
TX Transmit Power:
802.11b:
Typ. 18±1.5 dBm @ 1 to 11 Mbps
802.11g:
Typ. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps
802.11a:
Typ. 16±1.5 dBm @ 6 to 24 Mbps, Typ. 14±1.5 dBm @ 36 to 48 Mbps, Typ. 13±1.5 dBm @ 54 Mbps
RX Sensitivity:
802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
Protocol Support
General Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, RTP ,PPPoE, DHCP
AP-only Protocols: ARP, BOOTP, DHCP, dynamic VLAN-Tags for 802.1X-Clients, STP/RSTP (IEEE 802.1D/w)
Interface
Default Antenna: 2 dBi, dual-band omni-directional antenna, RP-SMA (male)
Connector for External Antenna: RP-SMA (female)
LAN Port: 10/100BaseT(X) auto negotiation speed (RJ45-type)
Console Port: RS-232 (RJ45-type)
LED Indicators: PWR1, PWR2, PoE, FAULT, STATE, WLAN1, WLAN2, 10M, 100M
Alarm Contact (Digital Output): 1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs: 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing: Metal, IP30 protection
Weight: 880 g
Dimensions: 62.05 x 135 x 105 mm (2.44 x 5.31 x 4.13 in)
Installation: DIN-Rail mounting (standard), Wall mounting (optional)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5% to 95% (non-condensing)
Power Requirements
Input Voltage: 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant)
Connector: 10-pin removable terminal block
Reverse Polarity Protection: Present
Regulatory Approvals
Safety: EN60950-1(pending), UL60950-1
EMC: EN301 489-1/-17, FCC Part 15
Downloads
Additional information
| Weight | 3 kg |
|---|---|
| is_recurring | 0 |
| naya_call_for_price_enable | 1 |
| short_description | <p> |
| meta_title | Buy AWK-5222 DUAL-RF INDUSTRIAL WIRELESS AP/BRIDGE/CLIENT Online |
| meta_keyword | wireless, industrial, AP, bridge, client, dual-RF, AWK-5222, awk5222, awk 5222 |
| meta_description | The AWK-5222 dual-RF wireless AP/Bridge/Client provides a flexible and highly reliable solution for your industrial wireless networks. The AWK-5222 is rated to operate at temperatures ranging from 0 to 60°C for standard models. |
| msrp_display_actual_price_type | 4 |
| tax_class_id | 2 |
![https://www.atexshop.com/images/download.jpg"](https://www.atexshop.com/images/download.jpg"){kind=link}